Equipment

Below is the equipment I currently have for amateur radio related activities.

HANDY-TALKIES (HTs)

  • Yaesu VX-7R (black) dual-receive 4-band tranceiver
    • 6 m, 2 m, 1.25 m (0.3 W), 70 cm TX at 5 W
    • AM TX on 6 m with 1 W carrier
    • Wide-band RX from 0.500 MHz to 998.9875 MHz (cell blocked)
    • RX modes: AM, Wide-FM (broadcast FM and TV), Narrow-FM
    • Dual VFO receivers (sub receiver HAM bands only)
    • Software manageable memories and modifyable
    • 4 TX power modes (0.05 W, 1.0 W (0.3 W on 1.25 m), 2.5 W, 5 W)
    • 450 standard frequency memories (with independent offset frequencies, CTCSS, DCS settings, and 8 character names for each), 12 home channel memories, 20 band-edge memories, 10 one-touch-memories, 10 "hyper-memories" (stores frequency and panel settings), 89 short-wave/medium-wave memories, 10 weather memories, 281 marine memories, and 9 memory groups (groups up to 40 standard memories into each group memory)
    • Smat Scan (automatic channel detection above and below the selected frequency)
    • Channel Counter (detect strong transmitter frequency)
    • Spectrum Analyzer (graphically show signal stregths on nearby channels)
    • DTMF tones with 10 auto-dialer memories
    • WIRES-II (Wide-coverage Internet Repeater Enhancement System) Internet repeater compatibility
    • ARTS (Automatic Range Transponder System) in-range/out-of-range testing system compatible
    • Multi-color "strobe" LED with customizable colors for various operations
    • Graphic LCD with customizable icons and fonts
    • Built-in temperature sensor and voltage meter
    • Optional barometer/altimiter sensor (my unit has this option installed)
    • Submersible in up to 3 feet of water for up to 30 minutes
    • 1400 mAh 7.2 V lithium-ion battery
    • Can operate on 10 to 16 V DC input (through external DC input jack)
    • 2 AA cell battery operation with optional battery case for RX and low power TX (up to 0.3 W)

ANTENNAE

  • Comet (NCG) M-24B 2 m/70 cm magnetic mount antenna
    • 1.7 dBi gain on 2 m
    • 4.1 dBi gain on 70 cm
    • 1.5:1 or less VSWR
    • 19.5" long
    • RG-58 A/U 12 foot coax cable attached to mount with BNC connector
    • Handles up to 80 W
  • Pryme (ANLI) AL-800 2 m/70 cm high gain HT telescoping antenna
    • 3.2 dBi gain on 2 m (fully extended)
    • 5.6 dBi gain on 70 cm (fully extended)
    • 1.5:1 or less VSWR
    • 34.6 inches fully extended
    • 60 W max (25 W CW)
  • WA3HRL's BGA-80 SMA to BNC adapter for the VX-7R with rubber chasis brace

Main Page | QRH (Frequencies) | QTH (Location) | Equipment | Contact Me
Copyright © 2005 Nathan Sheldon